Masport Logo

INNOVATION is what sets us apart...

Masport has developed a comprehensive range of lawn and garden equipment because every lawn is different. Built to last, these mowers have been designed ot meet the needs of the heaviest lawn conditions and the longest mowing times. Masport combines quality and innovation with reliability you can trust.

Adjustable Dual Bearing Wheels

  • ball bearing wheels make the mower easy to push
  • with a threaded axle and nut the wheels can easily be adjusted if they become loose after significant use

Smartchute®

  • mow without the catcher, and avoid the messy grass clumps
  • will side discharge a clean spread of clippings as you mow

Blade System

  • One piece bar blade for efficient cutting and mulching

Single Lever Height Adjustment

  • deck can be raised or lowered easily and evenly with one simple motion and one simple lever

Throttle Control & Deep Tread Rear Tires

  • Most self-propelled models have been equipped with a throttle control lever for increased engine control and deep tread rear tires to prevent slippage on uneven terrain

Unturned Handle

  • mow without the catcher, and avoid the messy grass clumps
  • will side discharge a clean spread of clippings as you mow
Masport Utility 460

Utility 460

Side Discharge Only

  • Powered by Briggs & Stratton 125cc OHV Series 450E Primer 4 stroke engine
  • 18" deep draw heavy duty 16 gauge steel chassis
  • Masport Bar Blade - One piece bar blade for efficient cutting
  • Front 7" and Rear 7" adjustable dual bearing wheels
  • Comfortable upturned upper handle
  • Reinforced lower handle for added strength
  • Camlocks for quick release handle fold down
  • Zone start for comfortable starting position

Utility 530

Side Discharge Only

  • Powered by Briggs & Stratton 163cc OHV Series 675EXi ReadyStart™ 4 stroke engine
  • ReadyStart™ - no priming required and easy starting
  • JUST CHECK & ADD™ - never change the oil, just check and add for the life of the engine
  • 21" deep draw heavy duty 14 gauge steel chassis
  • Masport Bar Blade - One piece bar blade for efficient cutting
  • Front 8" and Rear 8" adjustable dual bearing wheels
  • Comfortable upturned upper handle with soft grip
  • Reinforced lower handle for added strength
  • Camlocks for quick release handle fold down
  • Zone start for comfortable starting position
Masport Utility 530
Masport 800 ST Push 3n1

800 ST Push 3' n 1

Cut | Catch | Mulch | Side Discharge

  • Powered by Briggs & Stratton 163cc OHV Series 675EXi ReadyStart™ 4 stroke engine
  • ReadyStart™ - no priming required and easy starting
  • JUST CHECK & ADD™ - never change the oil, just check and add for the life of the engine
  • 21" deep draw heavy duty 14 gauge steel chassis
  • Masport Bar Blade - One piece bar blade for efficient cutting
  • Front 8" and Rear 8" adjustable dual bearing wheels
  • Comfortable upturned upper handle with soft grip
  • Reinforced lower handle for added strength
  • Camlocks for quick release handle fold down
  • Double Lined Fabric Catcher
  • Smartchute® for side discharge
  • Zone start for comfortable starting position
  • Masport Dual Mowzone® for edge to edge cutting for edge to edge cutting

800 ST S21 3'n1 SP

Cut | Catch | Mulch | Side Discharge

  • Powered by Briggs & Stratton 163cc OHV Series 675EXi ReadyStart™ 4 stroke engine
  • ReadyStart™ - no priming required and easy starting
  • JUST CHECK & ADD™ - never change the oil, just check and add for the life of the engine
  • Variable Speed Self Propelled - Ground speed 2.21 mph - 4.24 mph
  • Masport Bar Blade - One piece bar blade for efficient cutting
  • Front 8" and Rear 9" deep tread adjustable dual bearing wheels
  • Comfortable upturned upper handle with soft grip
  • Reinforced lower handle for added strength
  • Ergo camlocks for adjustable handle position
  • Handle Lift System for easy catcher removal and storage
  • Double Lined Fabric Catcher
  • Smartchute® for side discharge
  • Zone start for comfortable starting position
Masport 800 ST S21 3n1 SP
Masport ST S21 3in1 SPV

800 ST S21 3'n1 SPV

Cut | Catch | Mulch | Side Discharge

  • Powered by Briggs & Stratton 163cc OHV Series 675EXi ReadyStart™ 4 stroke engine
  • ReadyStart™ - no priming required and easy starting
  • JUST CHECK & ADD™ - never change the oil, just check and add for the life of the engine
  • 21" deep draw heavy duty 14 gauge steel chassis
  • Variable Speed Self Propelled - Ground speed 2.21 mph - 4.24 mph
  • Masport Bar Blade - One piece bar blade for efficient cutting
  • Front 8" and Rear 9" deep tread adjustable dual bearing wheels
  • Comfortable upturned upper handle with soft grip
  • Reinforced lower handle for added strength
  • Ergo camlocks for adjustable handle position
  • Handle Lift System for easy catcher removal and storage
  • Double Lined Fabric Catcher
  • Smartchute® for side discharge
  • Zone start for comfortable starting position

800 AL SPV 3'n1 - 850

Cut | Catch | Mulch | Side Discharge

  • Powered by Briggs & Stratton 190cc OHV Series 850 Professional IC ReadyStart™ 4 Stroke engine
  • ReadyStart™ - no priming required and easy starting
  • Cast iron sleeve in cylinder
  • 21" heavy duty aluminum non rust chassis
  • Variable Speed Self Propelled - Ground speed 1.98 mph - 4.14 mph
  • Masport Bar Blade - One piece bar blade for efficient cutting
  • Mulching blade also included loose in carton
  • Front 8" and Rear 9" deep tread adjustable dual bearing wheels
  • Comfortable upturned upper handle with soft grip
  • Reinforced lower handle for added strength
  • Ergo camlocks for adjustable handle position
  • Handle Lift System for easy catcher removal and storage
  • Double Lined Fabric Catcher
  • Smartchute® for side discharge
  • Zone start for comfortable starting position
  • Washport to facilitate cleaning
sprt 800 AL SPV 3'n1 - 850
Masport Contractor SPV 3'n1 B&S

Contractor SPV 3'n1 B&S

Cut | Catch | Mulch | Rear Discharge

  • Powered by Briggs & Stratton 190cc OHV Series 850 Professional IC ReadyStart™ 4 Stroke engine
  • ReadyStart™ - no priming required and easy starting
  • Cast iron sleeve in cylinder
  • 21" deep draw heavy duty 14 gauge steel chassis
  • Steel front bumper and engine guard offer protection to the cutting chassis
  • Bolt in front axle with steel bearing plates bolted directly to the chassis
  • GT Agility PRO 3 Speed Commercial transmission - Ground speed 2.32 mph - 4.12 mph
  • Masport Bar Blade - One piece bar blade for efficient cutting
  • Mulching blade also included loose in carton
  • Large wide diameter professional grade heavy duty cast aluminium Front 8" and Rear 9¼" wheels with synthetic rubber tyres and precision 6202 sealed ball bearings
  • Comfortable and sturdy upturned upper handle with PVC grip, large diameter and heavier gauge steel tube
  • Robust lower handle with additional bracing for extra durability
  • 3 position handle locking system for different height settings
  • Large capacity Commercial Dacron Catcher with dust cover
  • Rear Discharge Chute designed for safe discharge of grass when mowing without a catcher
  • Zone start for comfortable starting position

Contractor ST S21 3'n1 SPV BBC B&S

Cut | Catch | Mulch | Rear Discharge

  • Powered by Briggs & Stratton 190cc OHV Series 850 Professional IC ReadyStart™ 4 Stroke engine
  • ReadyStart™ - no priming required and easy starting
  • Cast iron sleeve in cylinder
  • 21" deep draw heavy duty 14 gauge steel chassis
  • Steel front bumper and engine guard offer protection to the cutting chassis
  • Bolt in front axle with steel bearing plates bolted directly to the chassis
  • GT Agility PRO 3 Speed Commercial transmission - Ground speed 2.32 mph - 4.12 mph
  • Masport Bar Blade - One piece bar blade for efficient cutting
  • Mulching blade also included loose in carton
  • Large wide diameter professional grade heavy duty cast aluminium Front 8" and Rear 9¼" wheels with synthetic rubber tyres and precision 6202 sealed ball bearings
  • Comfortable and sturdy upturned upper handle with soft grip, large diameter and heavier gauge steel tube
  • Robust lower handle with additional bracing for extra durability
  • 3 position handle locking system for different height settings
  • Large capacity Commercial Dacron Catcher with dust cover
  • Rear Discharge Chute designed for safe discharge of grass when mowing without a catcher
  • Zone start for comfortable starting position
Masport Contractor ST S21 3'n1 SPV BBC B&S
Masport Contractor SPV 3'n1 B&S

Rotarola SP AL

Cut | Catch | Stripe

  • Powered by Briggs & Stratton 190cc OHV Series 850 Professional IC ReadyStart™ 4 Stroke engine
  • ReadyStart™ - no priming required and easy starting
  • Cast iron sleeve in cylinder
  • 21" heavy duty aluminum non rust chassis
  • Self Propelled - Ground speed 3.2 mph
  • Masport Bar Blade - One piece bar blade for efficient cutting
  • Front 8" and 5" Rear steel roller adjustable dual bearing wheels
  • Comfortable upturned upper handle with soft grip
  • Reinforced lower handle for added strength
  • Camlocks for quick release handle fold down
  • Aero Catcher
  • Steel rear flap
  • Zone start for comfortable starting position

800 ST S21 3'n1 SP - IC

Cut | Catch | Mulch | Side Discharge

  • Powered by Briggs & Stratton 190cc OHV Series 850 Professional IC ReadyStart™ 4 Stroke engine
  • ReadyStart™ - no priming required and easy starting
  • Cast iron sleeve in cylinder
  • 21" deep draw heavy duty 14 gauge steel chassis
  • Steel front bumper and engine guard offer protection to the cutting chassis
  • Self Propelled - Ground speed 2.8 mph
  • Masport Bar Blade - One piece bar blade for efficient cutting
  • Front 8" and Rear 9" deep tread adjustable dual bearing wheels
  • Comfortable upturned upper handle with soft grip
  • Reinforced lower handle for added strength
  • Ergo camlocks for adjustable handle position
  • Aero Catcher
  • Smartchute® for side discharge
  • Zone start for comfortable starting position
Masport 800 ST S21 3'n1 SP - IC
800 ST S21 3'n1 SPV

800 ST S21 3'n1 SPV

Cut | Catch | Mulch | Side Discharge

  • 21" deep draw heavy duty 14 gauge steel chassis
  • Variable Speed Self Propelled - Ground speed 2.21 mph - 4.24 mph
  • Masport Bar Blade - One piece bar blade for efficient cutting
  • Front 8" and Rear 9" deep tread adjustable dual bearing wheels
  • Comfortable upturned upper handle with soft grip
  • Reinforced lower handle for added strength
  • Ergo camlocks for adjustable handle position
  • Handle Lift System for easy catcher removal and storage
  • Double Lined Fabric Catcher
  • Smartchute® for side discharge

350 ST Combo

Cut | Mulch | Side Discharge

  • Powered by Briggs & Stratton 140cc OHV Series 550EX ReadyStart™ 4 stroke engine
  • ReadyStart™ - no priming required and easy starting
  • 18" deep draw heavy duty 16 gauge steel chassis
  • Masport Bar Blade - One piece bar blade for efficient cutting
  • Front 7" and Rear 8" adjustable dual bearing wheels
  • Comfortable upturned upper handle
  • Two piece lower handle for easy catcher access
  • Camlocks for quick release handle fold down
  • Optional Fabric Catcher
  • Smartchute® for side discharge
  • Zone start for comfortable starting position
  • Changing to #467704 - 350 ST 2'n1
Masport 350 ST Combo
edger
Consumer warranties

Masport is committed to quality and performance. We back our products.Masport Walk Behind Mowers have a 4 year consumer warranty and 1 year commercial warranty. All other Masport products carry a 2 year consumer warranty and 3 months commercial warranty. With a wide product range that is durable, hardworking and well-designed, you can trust Masport. A range of quality spares and accessories are available.Consumers do not need to register their warranties online in markets outside of New Zealand and Australia. It is sufficient to only provide proof of, and date of purchase to the retailer the machine was purchased from to validate the warranty, as set out in the warranty card provided with your purchase.For full terms & conditions of your Masport warranty, please refer to your Warranty Card supplied with your Masport product. These warranties are for the machine only with engines being supported directly by the engine manufacturer. Please refer to the separate engine warranty card supplied with your machine.